OCA Full Covers

At OCA we have made a full cover pattern to suit each motor from 2hp – 600hp, this includes all leg sizes from short to ultra long. Our made-to-measure full outboard engine covers have been designed to protect your engine during storage and towing. Made from our soft-lined material called Polysoft®, a marine grade fabric which is waterproof, breathable, UV stable and felt backed so it won’t scratch your outboard. “Covering your motor from top to prop”

Outboard Covers - complete protection

 

 

 

 

 

 

 

 

 

 

...The Manufacturers Choice

Full Covers

Our made-to-measure Full Outboard Engine Covers have been designed to protect your engine when towing and storing. Made from fleece-lined Polysoft®, a marine grade fabric which is waterproof, breathable and UV stable. With over 100,000 in use and customers from the Arctic to Australia and USA to UK, you can be assured your motor will be protected by the best product on the market.

Each cover is designed to suit your motor which will include leg sizing which could be anything from 15″ short to 30″ Ultra long. We also have many optional extra’s such as a fin or cav plate pouch or zip protection just to name a few.

v

FACT

Protecting your outboard properly will improve resale value.

Why You Need One

Full Covers are designed to remain on the engine at all times protecting the cowling from:

  • UV Fading
  • Accidental knocks and scratches
  • Stone, dust and gravel damage
  • Simple and quick to fit
  • Security and protection additions available.
  • Optional extras for Full covers – VIEW

Technical Details

We use Polysoft® & Polysoft® II a technically tested marine grade fabric offering the following benefits:

  • 95% waterproof
  • 5% breathable avoiding corrosion and condensation
  • UV stable*, Polysoft® P1 is guaranteed for 2 years against rotting & fading
  • UV stable*, Polysoft® P2 is guaranteed for 4 years against rotting & fading
  • Incredibly strong with a 660lb breaking strength
  • Non-abrasive polyester soft backing
  • Simple to clean, just wash with fresh water

*If you follow our guide to cleaning and maintainence.

t

Covers arrived today!  I have a 2016 Yamaha 200 and a 9.9 Yamaha on a 2016 Hewescraft Sea runner. First I could not believe how fast the turn around time was from the time the order was placed till I received the product, Less than two weeks!  The covers fit absolutely Perfect.  The quality is by far better than anything out there on the market than I have ever seen.

I am not the kind of person to take the time to give a review on anything I buy, and I buy a lot of hunting and fishing products!  I have already been asked by several people on the First trip out where I got them from.

I hope this will generate some business for you.  Well worth the price to cover these expensive outboards!  Thanks Again.

Trace Peck, Albuquerque New Mexico

Polysoft® II

Our new exclusively made fabric with higher spec’s, nick named P2 fabric

Polysoft® II offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt backed polyester backing. Polysoft® II also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft® II?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 4 year guarantee against fading and rotting. We also offer a 3 year limited warranty on our high quality workmanship (commercial applications we offer 2 years on both). We have sold covers all over the World and our reputation is second to none for service and quality. Current colors this new fabric is available in is black, charcoal and light gray.

New Black Fabric Compare 2The black is a lot blacker than our previous fabric and other colors will be added to our range over the next 12 months.

 

Technical Specifications:

 Polysoft®  Original Spec’s
Polysoft®  II Spec’s
 Med U.V. resistance  High U.V. resistance
100% Woven polyester material 100% Woven polyester material
UV resistant rated 3 out 5 on a UV scale       Grade -3 @1000 hours UV resistant rated 4 out 5 on a UV scale,         Grade >4 @1000 hours
Spray Rating: 90 Spray Rating: 100
High tear and abrasion resistance High tear and abrasion resistance
Excellent mould and mildew resistance Excellent mould and mildew resistance
Med/ High water resistance High water resistance

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged

Latest Testimonial

A brief note on my experience with Geoff and Leanne Felgate’s company, Outboard Covers & Accessories (a.k.a. Outboard Covers Australia) as per www.outboardcovers.com.au.

I wholeheartedly recommend Outboard Covers Australia. Although their website does the job, I still prefer to order via phone and I am glad to say Geoff has answered the phone every time I have called. What more do you want? I have sold the Quintrex and now own a Sirocco RIB with a Honda F20; neat, fast and fun and now with a new cover for my new engine.

OZ-5.14

For more click HERE->

Polysoft® (The original fabric)

Polysoft® offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt like polyester backing. Polysoft® also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft®?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 2 year guarantee against fading and rotting. We also offer a 3 years limited warranty on our high quality workmanship (commercial use 12 months on each). We have sold covers all over the World and our reputation is second to none for service and quality.

Polysoft

Technical Specifications:

100% Woven polyester material

Soft non-woven back

Dimensionally stable

UV resistant

Highly water repellent

Mildew resistant

Tensile Strength: 348 lb warp, 222 lb fill

Tongue Tear Strength: 36 lb warp, 30 lb fill

Spray Rating: 90

Hydrostatic Resistance: 8″ for 10 minutes, 0 mil

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged