Outboard Covers & Accessories

Australian Order Form

Outside Australia? Click here to select your region

Please do not use your browser back button - use the buttons at the bottom of each page.

PLEASE READ - All covers are made to order, for lead times click here

Type of Product:

Select Your Motor

Make of Outboard:

Stroke:

Horse Power (HP):

Year of Manufacture:

Model & Image:
Select motor from list and click image for larger view.
Some models vary in colour and decal design. If your motor's SHAPE is different then please select another model
If the image does not look like your motor or no image is present please click here for further information.

Where multiple options are offered CHECK ALL IMAGES and descriptions.

Model # & Other Information

I confirm that the model selected is the one I am ordering a cover for.

Select Cover Types & Colour

Cover/s Required?

AUD $0.00

Main Colour? more info

White Fabric Disclaimer more info

AUD $0.00

Optional secondary FABRIC Colour? more info:
Only if different FABRIC Colours are required.

AUD $0.00

**Not available with Manufacture branding
unless Mercury Accent Panel

Splash Cover colour Choice

You may have the Splash cover in a different colour to the Full if buying a Combo set.

Main Colour? more info

White Fabric Disclaimer more info

AUD $0.00

Optional secondary Fabric colour?
Only if different FABRIC Colours are required.

AUD $0.00

**Not required for single colour cover.

Leg Length? more info

Power Trim & Tilt? more info

Pull Start?

Can have both electric & pull - See above

Electric Start?

Can have both electric & pull - See above

Internal Fuel Tank?

Fuel inserted into motor via fill cap (usually small motors 2-8hp)

Fin or Prop Guard fitted? more info

AUD $0.00

A full or combo order only?

Fin/Prop Guard measurements
Fin Measure Inst. (PDF)
Prop Guard Measure Inst. (PDF)
If unsure of your measurements, please select 'Other' & enter details in the boxes.

Input measurements if you have selected '*NOT LISTED':

A:	B:	C:
D:	E:	F:

Back

Select Printing Options

Print Engine Horse Power on Rear?

AUD $0.00

Would you like any printing on your cover/s?
If you select 'NO' the cover will be plain with ONLY the OCA logo.

You have chosen to have your cover without any printing or manufacturer logos.

Please note that all OCA covers carry our logo on the rear.

Type of printing required?

Not available on Camo covers

Text required?

Don't put Yamaha/Mercury/Mariner/Suzuki/Honda text.
Click for more info.

Leave blank for our standard font (>TW Cen MT Condensed Italic).

Picture logo? (300+dpi)
Click here
Please do not send images downloaded from the internet. These are not good enough quality to print.

Browse for the picture you would like to send to us. Images can be in JPG, EPS, BMP, GIF or PDF formats.

Manufacturer's logo?

AUD $0.00

NOTE:- If the manufacturer is not listed then we cannot print their logos in your region. Please contact your local outboard dealer.

Please click here to see what branding we are allowed to print. We have been authorised to print the Evinrude logo on CERTAIN covers only. We cannot add or remove anything so please do not ask.

Please note that Evinrude branding is only available on our Lt Grey or Dark Blue colour fabric. If you have selected anything else we will automatically amend your order accordingly.

Please click here to see branding examples. We have been authorised to print the Honda logo as shown and cannot add or remove anything so please do not ask.

Please note that Honda branding is only available on our Lt Grey colour or White fabric. If you have selected anything else we will automatically amend your order accordingly.

NOTE: If the manufacturer is not listed then we cannot print their logos in your region. Please contact your local outboard dealer.

Mariner branding will be as per the images below.

Please note that Mariner branding is only available on Light Grey colour fabric. If you have selected anything else we will automatically amend your order accordingly.

Mariner Branded

Please click here to see examples of what you will get when you order a Mercury branded cover. We cannot add or remove anything so please do not ask.

Please note that Mercury branding is only available on our Black P2 or White colour fabrics. If you have selected anything else we will automatically amend your order accordingly.

NOTE: If the manufacturer is not listed then we cannot print their logo's in your region. Please contact your local outboard dealer.

Please click here to see examples of what you will get when you order a Suzuki branded cover. We cannot add or remove anything so please do not ask.

Please note that Suzuki branding is only available on our Black P2 or White colour fabrics. If you have selected anything else we will automatically amend your order accordingly.

Tohatsu branding will be as per the images below.

We can print the Tohatsu logo on Black/ White or Harbour Blue colour fabric and it will be printed as shown.

Tohatsu Branded

Please click here to see examples of what you will get when you order a Yamaha branded cover. We cannot add or remove anything so please do not ask.

Please note that Yamaha branding is only available on our Charcoal, White and Black (SHO Models) P2 colour fabrics. If you have selected anything else we will automatically amend your order accordingly.

OCA stock image?

If you would like some optional free text with your stock image please add it in the box below

Click here for an example.

AUD $0.00

Print on what covers?

Printing type?

AUD $0.00

Back

Optional Extras

Hi-Viz Strip?
More info
A strip of Hi Vis material that runs left to right about where the prop is on our full covers. Be seen at night.

Cost to add a hi-viz strips is AUD $

Transom Saver Xtra Padding?
More info
Ideal for Y fork holders to support motor

Cost to add transom padding is AUD $

Zip Protector on leg?
More info
Ideal for gravel/dirt roads were the standard zip may get damaged by flying stones

Cost to add a zip protector to lower leg is AUD $

Tiller Arm Cover?
Click here
Ideal for those wanting to cover the tiller

Cost to add separate tiller arm cover is AUD $

Locking Device?
Click here
Allows you to fit a padlock to the cover

Cost to add locking eye is AUD $

Delivery/Shipping Method?
For delivery lead times: click here

Quantity?
For delivery lead times: click here

Promotion Code: click here

Discount: -AUD $0.00

Total Price:

AUD $0.00

I have read and agreed to Terms & Conditions of this web order.

Australian Order Form

Select Your Motor

Select Cover Types & Colour

Splash Cover colour Choice

Select Printing Options

You have chosen to have your cover without any printing or manufacturer logos.

Select Extras & Shipping Method

Optional Extras