As the global supplier for Mercury approved covers,

OCA was very proud to be asked to develop the covers for these

amazing new motors. Working on the prototype and then

production versions.

 

Coming to an authorized dealer near you soon.

 

 

                         OCA...the manufacturers choice

Vented Splash® covers (cowling protection), Full storage & towing covers, Combo sets (full and splash® together). We make covers to protect your Mercury outboard motor in all conditions – even when in use! Approved by Mercury Marine so you can buy with confidence – Fit The Best…

Our vented Splash® covers have been tested by Mercury and will protect your motor whilst running.

If you cannot see a picture of your motor in our gallery it does not mean we don’t have the pattern for it. We have over 800 patterns for outboards going back as far as the 1970’s and all the latest models.

To get a quote for your model simply use our intractive order pages using the link below.

We have been making covers since 2000 and have customers all over the Globe. Check out our feedback HERE->

Click any image to enlarge and see more.

« of 4 »

OCA has been approved by Mercury Marine and supply branded covers in various regions.

Branded covers are ONLY available via authorised Mercury dealers throughout Australia and New Zealand. To find your nearest dealer please click HERE-> to use the dealer locator.

Also OCA will not print any trademark word or logo that belongs to Mercury Marine. These will include words like Optimax or Opti, Mercury or Merc, Verado or other words or abbreviations. Supercharged, Saltwater or genic words are fine.

If you have problems ordering please contact us and we will help resolve the problem. Click any image below for more.

« of 5 »

Need Help?

Get answers

Get a Quote

Quote Page

Order Page

Order Page

Mercury News

The ‘official’ vented Splash covers for the new Mercury V6 and V8 models – Now available with the Accent panel options and Mercury decals.

Developed with Mercury Marine to ensure you get a cover that will protect your motor not damage it. Also includes a ‘door’ so that the oil view system can be used with the cover fitted.

             

Mercury News

Mercury branded covers now exclusively available from your local, authorised Mercury dealer.

M150-4 from Merc Website

Keep it covered… Keep it protected

Polysoft® II

Our new exclusively made fabric with higher spec’s, nick named P2 fabric

Polysoft® II offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt backed polyester backing. Polysoft® II also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft® II?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 4 year guarantee against fading and rotting. We also offer a 3 year limited warranty on our high quality workmanship (commercial applications we offer 2 years on both). We have sold covers all over the World and our reputation is second to none for service and quality. Current colors this new fabric is available in is black, charcoal and light gray.

New Black Fabric Compare 2The black is a lot blacker than our previous fabric and other colors will be added to our range over the next 12 months.

 

Technical Specifications:

 Polysoft®  Original Spec’s
Polysoft®  II Spec’s
 Med U.V. resistance  High U.V. resistance
100% Woven polyester material 100% Woven polyester material
UV resistant rated 3 out 5 on a UV scale       Grade -3 @1000 hours UV resistant rated 4 out 5 on a UV scale,         Grade >4 @1000 hours
Spray Rating: 90 Spray Rating: 100
High tear and abrasion resistance High tear and abrasion resistance
Excellent mould and mildew resistance Excellent mould and mildew resistance
Med/ High water resistance High water resistance

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged

Latest Testimonial

A brief note on my experience with Geoff and Leanne Felgate’s company, Outboard Covers & Accessories (a.k.a. Outboard Covers Australia) as per www.outboardcovers.com.au.

I wholeheartedly recommend Outboard Covers Australia. Although their website does the job, I still prefer to order via phone and I am glad to say Geoff has answered the phone every time I have called. What more do you want? I have sold the Quintrex and now own a Sirocco RIB with a Honda F20; neat, fast and fun and now with a new cover for my new engine.

OZ-5.14

For more click HERE->

Polysoft® (The original fabric)

Polysoft® offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt like polyester backing. Polysoft® also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft®?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 2 year guarantee against fading and rotting. We also offer a 3 years limited warranty on our high quality workmanship (commercial use 12 months on each). We have sold covers all over the World and our reputation is second to none for service and quality.

Polysoft

Technical Specifications:

100% Woven polyester material

Soft non-woven back

Dimensionally stable

UV resistant

Highly water repellent

Mildew resistant

Tensile Strength: 348 lb warp, 222 lb fill

Tongue Tear Strength: 36 lb warp, 30 lb fill

Spray Rating: 90

Hydrostatic Resistance: 8″ for 10 minutes, 0 mil

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged