Distribution

We have Distributors in various Countries – to find your local agent please click HERE-> and select your region from the Global home page.

Distribution of the best outboard covers available.

Find A Distributor Of Our Great Covers

Most good marine dealers, chandleries and boat shops sell our covers. See below about “STOCK”. You can however buy the product direct from us if you wish.

Outboard Covers & Accessories has over 700 distributors in Australia and overseas so the chances are that your local boat shop will probably sell our product.

Outboard Covers & Accessories also has an online web store. Our order pages are interactive ensuring you get the right cover for your motor. We use the best encryption available as indicated by the HTTPS at the beginning of the web address on the order pages.

Does Anyone Carry Stock?

Because EVERY cover is custom made to suit your requirements 99% of boat shops & marine dealers do not carry stock. As you can image if you wanted a cover you have a choice of 8 colours, then a 2 tone option plus each motor has a different leg size (full covers) and the smaller motors some have pull starts some don’t depending on the model. Then you have fitted hydro foil (fin/ trim tab bolted on cavitation plate) bolt on fins which again can affect the covers manufacturing process.

So we decided many years ago not to carry stock as we would need over 1 million covers in stock just to have one of every sized motor available….clearly this is not possible!!

We appreciate you would like to see the product before purchasing but it is not usually possible due to the Worldwide distribution of our production and the distances between Cities etc. Most of our work comes from referrals from existing customers so if you have not heard of us simply go to most fishing forums and ask about our product, we think you will be surprised how good our reviews will be.

If you have any questions about our product chances are we have answered the same question a few times in the past and would be very happy to answer any question you can pose to us.

If you are a Marne Dealer, read on……

Want to join the team and take orders at trade level? Please fill in the application form at the link below.

We look forward to hearing more about what you do and where you are located. No credit checks, just pay as you go by credit card, can’t be any easier than that.

We will contact you within 48 hours (longer if holiday or weekends).

 

Application Form->

Polysoft® II

Our new exclusively made fabric with higher spec’s, nick named P2 fabric

Polysoft® II offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt backed polyester backing. Polysoft® II also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft® II?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 4 year guarantee against fading and rotting. We also offer a 3 year limited warranty on our high quality workmanship (commercial applications we offer 2 years on both). We have sold covers all over the World and our reputation is second to none for service and quality. Current colors this new fabric is available in is black, charcoal and light gray.

New Black Fabric Compare 2The black is a lot blacker than our previous fabric and other colors will be added to our range over the next 12 months.

 

Technical Specifications:

 Polysoft®  Original Spec’s
Polysoft®  II Spec’s
 Med U.V. resistance  High U.V. resistance
100% Woven polyester material 100% Woven polyester material
UV resistant rated 3 out 5 on a UV scale       Grade -3 @1000 hours UV resistant rated 4 out 5 on a UV scale,         Grade >4 @1000 hours
Spray Rating: 90 Spray Rating: 100
High tear and abrasion resistance High tear and abrasion resistance
Excellent mould and mildew resistance Excellent mould and mildew resistance
Med/ High water resistance High water resistance

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged

Latest Testimonial

A brief note on my experience with Geoff and Leanne Felgate’s company, Outboard Covers & Accessories (a.k.a. Outboard Covers Australia) as per www.outboardcovers.com.au.

I wholeheartedly recommend Outboard Covers Australia. Although their website does the job, I still prefer to order via phone and I am glad to say Geoff has answered the phone every time I have called. What more do you want? I have sold the Quintrex and now own a Sirocco RIB with a Honda F20; neat, fast and fun and now with a new cover for my new engine.

OZ-5.14

For more click HERE->

Polysoft® (The original fabric)

Polysoft® offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt like polyester backing. Polysoft® also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft®?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 2 year guarantee against fading and rotting. We also offer a 3 years limited warranty on our high quality workmanship (commercial use 12 months on each). We have sold covers all over the World and our reputation is second to none for service and quality.

Polysoft

Technical Specifications:

100% Woven polyester material

Soft non-woven back

Dimensionally stable

UV resistant

Highly water repellent

Mildew resistant

Tensile Strength: 348 lb warp, 222 lb fill

Tongue Tear Strength: 36 lb warp, 30 lb fill

Spray Rating: 90

Hydrostatic Resistance: 8″ for 10 minutes, 0 mil

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged