The Manufacturers Choice

 

 

 

 

 

Fit the best.....

Made from soft-lined Polysoft®, a marine grade fabric which is waterproof, breathable and UV stable. Designed and approved to be left on during use.

Splash® Covers

OCA vented Splash® covers are made to individual model patterns and fit like a skin.They are specifically designed to be left on during use, providing protection both on and off the water.

Trusted by your motors manufacturer as well as military and commercial users Globally. OCA has spent over 18 years working with the outboard manufacturers to ensure our covers provide the ultimate protection without damaging your motor.

With over 80,000 in use and customers from the Arctic to Australia and USA to UK, you can be assured your motor will be protected by the best product on the market.

t
v

FACT

An OCA Splash® cover is, on average, less than 10% of the cost of a new motor cowling

Why You Need One

Splash® Covers are designed to remain on the engine at all times protecting the cowling from:

  • UV Fading
  • Accidental knocks and scratches
  • Bird Droppings
  • Salt Corrosion
  • Fishing Lure Damage
  • Tow Rope Damage

Technical Details

We use Polysoft® & Polysoft® II a technically tested marine grade fabric offering the following benefits:

  • 95% waterproof
  • 5% breathable avoiding corrosion and condensation
  • UV stable*, guaranteed for 2 years against rotting and fading
  • Incredibly strong with a 660lb breaking strength
  • Non-abrasive polyester soft backing
  • Simple to clean, just wash with fresh water

Our vented Splash® Covers are designed not to cover the tell-tale and exhaust ports.

Can be used during towing as well as on the water.

Are designed to allow access to an internal fuel tank, where fitted.

Are secured with marine grade shock cord that grips the engine just below where the cowling and engine head join.

Do not inhibit the motor’s performance in any way.

Our covers have been approved & tested by Suzuki, Tohatsu, Yamaha, BRP and Mercury/Mariner.

Galleries

Cover gallery

Price List

Full price list

Get a Quote

Secure quote pages

Order

Secure order pages

Cover and splash cover arrived today and WOW!!!! are they nice. You can tell just by the feel it’s quality, and the workmanship makes it all come together. I can’t tell you how refreshing it is to deal with someone who understands and pays as much attention to detail as I do. The price seemed a tad high at first, but after seeing them, the price was a steal. There is a slogan that one of our mechanical contractors has on their trucks that I have always liked and it applies here……

“Quality is remembered long after price is forgotten.”

Please express my thanks to Leanne for getting all my changes right the first time. Everything came out exactly as I envisioned. Can’t wait to get them installed when we pick up the boat next week. I will send you a photo or 12 when we get back. Thank you both for your frequent communication during the process, your professionalism and putting out such a top quality motor cover. My dealings with OCA has been my best online experience to date. Thank You Again!!!

Patrick & Pamela Crum Phoenix, AZ USA

Polysoft® II

Our new exclusively made fabric with higher spec’s, nick named P2 fabric

Polysoft® II offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt backed polyester backing. Polysoft® II also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft® II?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 4 year guarantee against fading and rotting. We also offer a 3 year limited warranty on our high quality workmanship (commercial applications we offer 2 years on both). We have sold covers all over the World and our reputation is second to none for service and quality. Current colors this new fabric is available in is black, charcoal and light gray.

New Black Fabric Compare 2The black is a lot blacker than our previous fabric and other colors will be added to our range over the next 12 months.

 

Technical Specifications:

 Polysoft®  Original Spec’s
Polysoft®  II Spec’s
 Med U.V. resistance  High U.V. resistance
100% Woven polyester material 100% Woven polyester material
UV resistant rated 3 out 5 on a UV scale       Grade -3 @1000 hours UV resistant rated 4 out 5 on a UV scale,         Grade >4 @1000 hours
Spray Rating: 90 Spray Rating: 100
High tear and abrasion resistance High tear and abrasion resistance
Excellent mould and mildew resistance Excellent mould and mildew resistance
Med/ High water resistance High water resistance

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged

Latest Testimonial

Completely brilliant cover!

With the sort of abuse we give our outboard (we use it for watersports, so the kids regularly clunk the engine cover with wakeboards and skis) one season later it should look like it’s from a 3rd world country – but instead it genuinely looks as good as new, still fits like the proverbial glove – and despite months of Med sunshine the colour hasn’t faded one bit – can’t recommend it highly enough – if only you guys did covers for the Mothership…
Splash-Slider-4
For more click HERE->

Polysoft® (The original fabric)

Polysoft® offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt like polyester backing. Polysoft® also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft®?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 2 year guarantee against fading and rotting. We also offer a 3 years limited warranty on our high quality workmanship (commercial use 12 months on each). We have sold covers all over the World and our reputation is second to none for service and quality.

Polysoft

Technical Specifications:

100% Woven polyester material

Soft non-woven back

Dimensionally stable

UV resistant

Highly water repellent

Mildew resistant

Tensile Strength: 348 lb warp, 222 lb fill

Tongue Tear Strength: 36 lb warp, 30 lb fill

Spray Rating: 90

Hydrostatic Resistance: 8″ for 10 minutes, 0 mil

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged