Custom Cover Printing

We can custom print your cover in either Black OR White or Full Colour. Below are some examples but we can print whatever you want (as long as it does not infringe any copyright laws). Use the tabs below for further information and examples.

Click any image to enlarge and see more.

« ‹ of 3 › »

 

Manufacturer branding is available in some regions and is dependent on the local agreements. Please see the individual ‘Brands’ page for full details.

Unfortunately, we can only supply branded covers as per manufacturers guidelines. We are not able to use any name or part of their logo individually it is all or nothing!

Outboard Covers is proud to offer our ©Copyrighted & specially designed range of fish to print on our covers. We have had these images designed for our covers and as they are under copyright cannot be used elsewhere. The logo ©Copyrighted stamp on the fish below will be removed on your cover.

Your boat name/wording, if required, will appear in line with the tail left to right and two words will be over split lines.

 Click any image to enlarge and see more.

« ‹ of 2 › »

We will need you to supply the following with your order if printing is required:-

Black OR White
 (Block printing black or white no shading or dual colours)

  • Text to be printed
  • Font required unless our standard (TW Cen MT Condensed with 10 degree slant) is required. Please note, if no font is specified we will use our standard one.
  • We will print Black OR White on each cover colour as detailed below unless specified otherwise.
    (e.g. Navy cover will have white print)

Colour-Swatches ROW PRINT

Colour

  • High resolution image of what is to be printed – this needs to be 300+dpi
  • Image to be printed in EPS, Jpeg, Bmp or PDF format

NOTE:- We cannot use images downloaded from the internet for two reasons; firstly they are not high enough resolution and secondly there may be a copyright issue. Also you cannot simply take a photo of your boat name & expect us to know what font it is, you will need to find out from the boat name designer.

Below are some of the available fonts we have. We actually have 85,000 fonts but thought we would show you some of the more popular ones. If you have a specific font please tell us and we can use that.

You can see print examples in the gallery pages HERE->

If you select our standard font (Tw Cent MT Condensed Italic) it will look like this:- Std Font

Fonts for web

We can also print your motor HP on the rear of your cover, you can select this option in the print section of the order pages.

If you need any help please contact us by using our secure LiveChat on the left of the page or use the Print Question form to the right.

Pricing

Full price list

Click here

Quote & Order

Secure quote/ order pages

Click here

Other Options

« ‹ of 7 › »

Print Question

7 + 15 =

Keep it covered… Keep it protected

Polysoft® II

Our new exclusively made fabric with higher spec’s, nick named P2 fabric

Polysoft® II offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt backed polyester backing. Polysoft® II also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft® II?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 4 year guarantee against fading and rotting. We also offer a 3 year limited warranty on our high quality workmanship (commercial applications we offer 2 years on both). We have sold covers all over the World and our reputation is second to none for service and quality. Current colors this new fabric is available in is black, charcoal and light gray.

New Black Fabric Compare 2The black is a lot blacker than our previous fabric and other colors will be added to our range over the next 12 months.

 

Technical Specifications:

 Polysoft®  Original Spec’s
Polysoft®  II Spec’s
 Med U.V. resistance  High U.V. resistance
100% Woven polyester material 100% Woven polyester material
UV resistant rated 3 out 5 on a UV scale       Grade -3 @1000 hours UV resistant rated 4 out 5 on a UV scale,         Grade >4 @1000 hours
Spray Rating: 90 Spray Rating: 100
High tear and abrasion resistance High tear and abrasion resistance
Excellent mould and mildew resistance Excellent mould and mildew resistance
Med/ High water resistance High water resistance

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged

Latest Testimonial

Completely brilliant cover!

With the sort of abuse we give our outboard (we use it for watersports, so the kids regularly clunk the engine cover with wakeboards and skis) one season later it should look like it’s from a 3rd world country – but instead it genuinely looks as good as new, still fits like the proverbial glove – and despite months of Med sunshine the colour hasn’t faded one bit – can’t recommend it highly enough – if only you guys did covers for the Mothership…
Splash-Slider-4
For more click HERE->

Polysoft® (The original fabric)

Polysoft® offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt like polyester backing. Polysoft® also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft®?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 2 year guarantee against fading and rotting. We also offer a 3 years limited warranty on our high quality workmanship (commercial use 12 months on each). We have sold covers all over the World and our reputation is second to none for service and quality.

Polysoft

Technical Specifications:

100% Woven polyester material

Soft non-woven back

Dimensionally stable

UV resistant

Highly water repellent

Mildew resistant

Tensile Strength: 348 lb warp, 222 lb fill

Tongue Tear Strength: 36 lb warp, 30 lb fill

Spray Rating: 90

Hydrostatic Resistance: 8″ for 10 minutes, 0 mil

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged