Outboard Covers & Accessories – The Manufacturers Choice

We are manufacturers of the original and best quality outboard covers in the World. Trusted by your motors manufacturer as well as military and commercial users Globally. OCA has spent over 18 years working with the outboard manufacturers to ensure our covers provide the ultimate protection without damaging the motor.

ORDER NOW
GET A QUOTE

Storage & Tow, Full Covers

 Our made-to-measure Full Outboard Engine Covers have been designed to protect your engine when towing & storing.

Yamaha F350 Pair

Vented Splash® Covers

Vented Splash® covers are made to model specific patterns and fit like a skin.They are specifically designed to be left on during use.

Combo Package

A Combo cover is 1 x vented Splash® and 1 x Full cover for the same motor bought as a set. The Full cover will also convert to a Mooring cover if required.

Mooring Covers

 If your boat lives in the water all year round, these covers will keep the weather and salt off that valuable motor.

Flush Bags

Made to suit motors up to 150hp. Flush your outboard quietly and easily.

Carry Bags

The OCA Outboard Carry Bag has been designed to transport and store portable outboard motors up to 6hp (4 stroke) and 9.9hp (2 stroke).

Get a Quote

Use our interactive pages to get a quote

Click Here

Order

Go to our secure, interactive order & quote pages

Click Here
Gday, not sure where to send these pics of one of your outstanding outboard covers. I purchased the cover in 2002 and it has only been off the cowling a few times for a bit of a clean.

Basically I didn’t look after the cover very well but as you can see 17 years down the track the cowling still looks like new. I have recently decided to upgrade the outboard and once iv finalised a new Yamaha first thing on my accessories list is one of your covers. Thanks for a great product.

No one believes how old the outboard is when I tell them lol. But when to see the lower part below the crowning you can see 17 years of use. Great product and have recommended it to lots of people. . New outboard ordered so I’ll get To ordering the new splash cover off you some time over the weekend. Thanks 👍🏻. Have a great weekend.

New Suzuki DF350

The covers for Suzuki’s new DF350 outboard are now available. For the official branded version please contact your local Suzuki marine dealership.

Polysoft® II

Our new exclusively made fabric with higher spec’s, nick named P2 fabric

Polysoft® II offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt backed polyester backing. Polysoft® II also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft® II?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 4 year guarantee against fading and rotting. We also offer a 3 year limited warranty on our high quality workmanship (commercial applications we offer 2 years on both). We have sold covers all over the World and our reputation is second to none for service and quality. Current colors this new fabric is available in is black, charcoal and light gray.

New Black Fabric Compare 2The black is a lot blacker than our previous fabric and other colors will be added to our range over the next 12 months.

 

Technical Specifications:

 Polysoft®  Original Spec’s
Polysoft®  II Spec’s
 Med U.V. resistance  High U.V. resistance
100% Woven polyester material 100% Woven polyester material
UV resistant rated 3 out 5 on a UV scale       Grade -3 @1000 hours UV resistant rated 4 out 5 on a UV scale,         Grade >4 @1000 hours
Spray Rating: 90 Spray Rating: 100
High tear and abrasion resistance High tear and abrasion resistance
Excellent mould and mildew resistance Excellent mould and mildew resistance
Med/ High water resistance High water resistance

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged

Latest Testimonial

Completely brilliant cover!

With the sort of abuse we give our outboard (we use it for watersports, so the kids regularly clunk the engine cover with wakeboards and skis) one season later it should look like it’s from a 3rd world country – but instead it genuinely looks as good as new, still fits like the proverbial glove – and despite months of Med sunshine the colour hasn’t faded one bit – can’t recommend it highly enough – if only you guys did covers for the Mothership…
Splash-Slider-4
For more click HERE->

Polysoft® (The original fabric)

Polysoft® offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt like polyester backing. Polysoft® also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft®?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 2 year guarantee against fading and rotting. We also offer a 3 years limited warranty on our high quality workmanship (commercial use 12 months on each). We have sold covers all over the World and our reputation is second to none for service and quality.

Polysoft

Technical Specifications:

100% Woven polyester material

Soft non-woven back

Dimensionally stable

UV resistant

Highly water repellent

Mildew resistant

Tensile Strength: 348 lb warp, 222 lb fill

Tongue Tear Strength: 36 lb warp, 30 lb fill

Spray Rating: 90

Hydrostatic Resistance: 8″ for 10 minutes, 0 mil

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged