Flush Mate™ Outboard Flush Bags
Made from rip-stop fabric with all seams welded to make this bag waterproof.
Flush Mate™ outboard motor flush bags are for use on most outboard motors with standard legs (no extra’s added like fins). Please check your motor size as the motor hp below is only an indication.
Place the flush bag CAREFULLY under the skeg & then attach the “guide strap” which goes over the top of the cowling. Fill with water to cover over water intakes, start your motor and it will flush out salt. Obviously, you cannot put the motor into gear as the prop will cut the bag! You should never allow the “guide strap” to take the weight of the water as it could damage your cowling/outboard due to the weight of the water:- 1 gallon of water = 8.3 Pounds (roughly). Once flushing is complete undo the drain plug in the flush bag to empty the water out.
| Size | Diameter | Height | Strap Length | Max water capacity |
| Small 2-70hp (approx.) | 18.5″ | 27.5″ | 68″ Max | 21 gallons |
| Large 80hp -> (approx.) |
27.5″ | 35″ | 98″ Max | 65 gallons |
Click on any image below for gallery.
Warnings
Do not engage gear whilst engine leg is in flush bag. You can increase the revs if the motor is in neutral.
Flush Mate Explained
Flushing your motor
Covers Photo Gallery
Covers gallery
Price List
Full price list
Quote & Order
Order flush bag