Customer Testimonials

Below is a small selection of the feedback we get from our customers all over the World. You can also see more up to date comments on our Facebook pages.

Gday,, not sure where to send these pics of one of your outstanding outboard covers. I purchased the cover in 2002 and it has only been off the cowling a few times for a bit of a clean.

Basically I didn’t look after the cover very well but as you can see 17 years down the track the cowling still looks like new. I have recently decided to upgrade the outboard and once iv finalised a new Yamaha first thing on my accessories list is one of your covers. Thanks for a great product.

No one believes how old the outboard is when I tell them lol. But when to see the lower part below the crowning you can see 17 years of use. Great product and have recommended it to lots of people. . New outboard ordered so I’ll get To ordering the new splash cover off you some time over the weekend. Thanks 👍🏻. Have a great weekend.

Yamaha F150 vented outboard cover

I hope you are doing well.  “Spring had Sprung and the season has Begun”.  We finally launched the boat.  I am sending you pictures of the covers installed.  The covers are great.  We shall be ordering for the other boats next year.  

Wishing you all the best.

Best Regards,

Margaret

Margaret - Greece

Just perfect product!!

I am very satisfied!!

Thanks a lot!!!

Thodoris - Greece

Cover and splash cover arrived today and WOW!!!! are they nice. You can tell just by the feel it’s quality, and the workmanship makes it all come together. I can’t tell you how refreshing it is to deal with someone who understands and pays as much attention to detail as I do. The price seemed a tad high at first, but after seeing them, the price was a steal. There is a slogan that one of our mechanical contractors has on their trucks that I have always liked and it applies here……

“Quality is remembered long after price is forgotten.”

Please express my thanks to Leanne for getting all my changes right the first time. Everything came out exactly as I envisioned. Can’t wait to get them installed when we pick up the boat next week. I will send you a photo or 12 when we get back. Thank you both for your frequent communication during the process, your professionalism and putting out such a top quality motor cover. My dealings with OCA has been my best online experience to date. Thank You Again!!!

Patrick & Pamela Crum Phoenix, AZ USA

I purchased three covers for my 275 Verados from you.  The Mercury Verados have a bad reputation for engine spray that covers the inside from ordinary running.  Your covers have stopped all spray.  I run in Florida in hot conditions and the covers have reduced my running temperature by two degrees. I also fish a lot of tournaments and I am spreading the word about the covers.   I have not seen you guys marketing this info but you should.  I am posting the good news on a National website for all Verado users and on the tournament trail.  My good fishing friend is Roland Martin and Mercury  is one of his sponsors.  Roland is looking at the covers for his offshore boat that BASS PRO SHOPS will be using on his T.V. show.  Keep up the good work.

Kim Karrick – South Louisiana USA July 2009 (Covers Bought Mercury 60hp 4stk EFI)

Firstly, I would like to thank you and commend you for your product and service. The whole process was very simply, quick and efficient. I also think it was very reasonably priced since I was was quoted “about $300” to have one made locally.
I think the cover looks good on the back of my boat and pretty much matches my sail covers. It certainly looks much better than my old one, don’t you think.

Aux-outboard

Just a quick note to let you know the cover fits my Suzuki 90 perfectly. The printing I asked for (boat name) on the cover is exactly the same font and colour as is on the boat – excellent match!! I have a week long fishing trip coming up in early July and when the boys see my cover, I expect there’ll be more orders coming your way. Thanks again. Beautiful job…….

Cheers

Glen - Australia

Hi Geoff.

Got home this arvo to find my new Combo covers on the doorstep. I have just fitted them and, like I expected, fitted like a glove.
As you are aware, this is the 2nd Combo set have bought from you and the quality is superb. It is only due to replacing my motor that I needed a new set.
The old covers are still in great condition after 6 years!!! I just need to find someone with a 115hp Tohatsu now that doesnt have a cover from OCA.

As promised, as soon as I get out on the water, I will take a photo and send it through! Thanks again for your great product,

Kind Regards

Scott Fraser, Wodonga VIC.

Dear James, Please see attached photo.The cover is excellent,very strong, well made,and fits like a glove.Thankyou for your quick and efficient service.Please pass on my thanks to your team and i will recomend you covers to my boating friends.

Kind Regards,

Merc-Tomato

Peter - UK

Dear James

Very chuffed with the cover…it didn’t budge an inch in a force 8 today !!

E-Tec-Splash-Blue

Blair - UK

Completely brilliant cover! With the sort of abuse we give our outboard (we use it for watersports, so the kids regularly clunk the engine cover with wakeboards and skis) one season later it should look like it’s from a 3rd world country – but instead it genuinely looks as good as new, still fits like the proverbial glove – and despite months of Med sunshine the colour hasn’t faded one bit – can’t recommend it highly enough – if only you guys did covers for the Mothership…

Splash-Slider-4

 

“I am in receipt of my outboard engine cover, and I am really impressed, not just in the quality of the item, and its “look” which I have to say is amazing, but mega impressed at the service. I deal with many companies all over the world, and I can honestly say I have never experienced such a high level of customer service, by any company at any time which could match the speed and delivery as the service I have had from OUTBOARD COVERS UK. I will be recommending you to every one at my marina in Wales, and indeed I intend to make sure that any one who is interested in buying a cover for their outboard takes a look at mine, and see for themselves just how lovely the covers are. You guys at outboard covers uk are seriously impressive people with incredible determination to serve well.

Its incredible to think that I place an order and within a matter of a few days I receive my order, all the way from Australia I might add, all the flipping way from Perth, we are not talking around the blooming corner. Meanwhile back in the UK, you cant get a first class letter quicker. This is a terrific quality product from an equally terrific company, if you the reader, want to look after your outboard, then take note, if you care about its looks, and you want to protect your investment, invest in a cover, not just any cover but one from OUTBOARD COVERS UK, thank you James for excellent service and a fabulous product. makes my boat look really good….

Graham - UK

Keep it covered… Keep it protected

Polysoft® II

Our new exclusively made fabric with higher spec’s, nick named P2 fabric

Polysoft® II offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt backed polyester backing. Polysoft® II also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft® II?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 4 year guarantee against fading and rotting. We also offer a 3 year limited warranty on our high quality workmanship (commercial applications we offer 2 years on both). We have sold covers all over the World and our reputation is second to none for service and quality. Current colors this new fabric is available in is black, charcoal and light gray.

New Black Fabric Compare 2The black is a lot blacker than our previous fabric and other colors will be added to our range over the next 12 months.

 

Technical Specifications:

 Polysoft®  Original Spec’s
Polysoft®  II Spec’s
 Med U.V. resistance  High U.V. resistance
100% Woven polyester material 100% Woven polyester material
UV resistant rated 3 out 5 on a UV scale       Grade -3 @1000 hours UV resistant rated 4 out 5 on a UV scale,         Grade >4 @1000 hours
Spray Rating: 90 Spray Rating: 100
High tear and abrasion resistance High tear and abrasion resistance
Excellent mould and mildew resistance Excellent mould and mildew resistance
Med/ High water resistance High water resistance

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged

Latest Testimonial

A brief note on my experience with Geoff and Leanne Felgate’s company, Outboard Covers & Accessories (a.k.a. Outboard Covers Australia) as per www.outboardcovers.com.au.

I wholeheartedly recommend Outboard Covers Australia. Although their website does the job, I still prefer to order via phone and I am glad to say Geoff has answered the phone every time I have called. What more do you want? I have sold the Quintrex and now own a Sirocco RIB with a Honda F20; neat, fast and fun and now with a new cover for my new engine.

OZ-5.14

For more click HERE->

Polysoft® (The original fabric)

Polysoft® offers strength, dimensional stability, and abrasion resistance with the addition of a lightweight, non-woven soft felt like polyester backing. Polysoft® also features great water, UV, and mildew resistance to endure marine environments.

What is Polysoft®?

In technical terms the material is an acrylic polymeric impregnated fabric. In other words it is a coated polyester that has a very high breaking strength, abrasion, mould and ultraviolet resistant. It also has excellent colour fastness and lasting outdoor durability. In fact Outboard Covers offers a 2 year guarantee against fading and rotting. We also offer a 3 years limited warranty on our high quality workmanship (commercial use 12 months on each). We have sold covers all over the World and our reputation is second to none for service and quality.

Polysoft

Technical Specifications:

100% Woven polyester material

Soft non-woven back

Dimensionally stable

UV resistant

Highly water repellent

Mildew resistant

Tensile Strength: 348 lb warp, 222 lb fill

Tongue Tear Strength: 36 lb warp, 30 lb fill

Spray Rating: 90

Hydrostatic Resistance: 8″ for 10 minutes, 0 mil

Why not Vinyl?

People also ask what is wrong with using vinyl or a padded vinyl won’t that stop the noise more and offer more protection?

Yes it MAY but as it is not breathable it will cause moisture to build up under both the cowl and cover. This will corrode the motor and damage the paint and decals.

Most people are not aware that a replacement cowl is extremely expensive and if new decals are required these are usually extra and can cost as much as one of our Splash covers.

This is typically what would happen if you made your outboard cover out of a material that does not have breathability such as vinyl or even neoprene which is used on wet suits. They do not have what Polysoft® has!

Mercury-damaged