Flush Mate™ Outboard Flush Bags
Made from rip-stop fabric with all seams welded to make this bag waterproof.
Flush Mate™ outboard motor flush bags are for use on most outboard motors (Small ->100hp, Large 115hp->) with standards legs (no extra’s added like fins).
Place the flush bag CAREFULLY under the skeg & then attach the “guide strap” which goes over the top of the cowling. Fill with water to cover over water intakes, start your motor and it will flush out salt. Obviously, you cannot put the motor into gear as the prop will cut the bag! You should never allow the “guide strap” to take the weight of the water as it could damage your cowling/outboard due to the weight of the water:- 1 gallon of water = 8.3 Pounds (roughly). Once flushing is complete undo the drain plug in the flush bag to empty the water out.
| Size | Diameter | Height | Strap Length | Max water capacity |
| Small 2-100hp | 47cm | 70cm | 175cm Max | 100L |
| Large 115hp -> |
70cm | 90cm | 250cm Max | 300L |
Click on any image below for gallery.
Warnings
Do not engage gear whilst engine leg is in flush bag. You can increase the revs if the motor is in neutral.