Support & Help
Below are responses to the most frequently asked questions. If you cannot find the answer to your question please use the contact form below and we will get back to you within 48 hours.
Can I operate my outboard with a vented Splash® Cover on?
In short – YES
Our Splash® covers have received approval from BRP, Mercury/Mariner, Honda, Suzuki and Yamaha. We have been making them since 2000 and have over 80,000 in use all over the World.
Made to model specific patterns they are designed to fit like a skin whilst air vents in the cover allow the motor to operate without any change in performance.
In tests (175 Optimax in 40 degrees) we recorded a 1 degree drop in engine oil temperature compared to running without a cover in the same conditions.
For information on our fabric and customisation see FAQ’s below.
For more information please see our Splash® cover page.
Can I tow my boat at speed with a Full cover?
Yes – our Full covers are made to model specific patterns as our Splash® covers. This means that they fit perfectly and do not flap and flog when the boat is being towed.
All Full covers also include a leg strap that pulls the cover tight and reduces the air flowing into the leg section.
We offer a number of optional extras that make towing safer and the cover even more protective. See the ‘optional extras‘ menu for details.
Can I tow my boat at speed with a Splash® cover?
All OCA vented Splash® covers have a safety strap included that we recommend is used once the cover is on. This is a Velcro strap in the front of the cover that we recommend is attached to the motor. Full details are included in the fitting instructions supplied with every cover.
Does the cover fabric breathe?
Yes – we use a fabric called Polysoft® and Polysoft II®, this is 95% waterproof and 5% breathable, it is also breathable, UV resistant and protected against mould.
For more details about Polysoft® click HERE->
Does the fabric fade?
Our covers and fabric have been tested and used in some of the most extreme conditions from the cold of Iceland to the extreme heat of Australia. Under these conditions the materials we use performed perfectly and provided the required protection.
Polysoft® is guaranteed against rotting and fading for 2 years.
Will the covers scratch my motor?
No – our fabric has a non-abrasive polyester backing. As well as this we put a protective layer between all zips and tie downs for the zip toggles.
Click HERE-> for fabric details
What colours are available?
We currently offer 8 standard colours and a camouflage option.
Colours can be mixed (maximum 2), for full details please see the colours page by clicking HERE->
Can the covers be printed?
Yes – we offer both black & white and full color printing on all our covers.
All you need to do is supply the text and font or a high resolution PDF or EPS file and we will do the rest. For full details click HERE->
We also print the manufacturers branding, this is subject to approval and is region specific. The print section of our interactive order pages will show you if we can offer this in your Country.
What is 'Trim & Tilt'?
What if I have a Hydrofoil on my motor?
If you have fitted a fin or Hydrofoil to the cavitation plate of your outboard and want a FULL cover we will need to know about it so we can add a pocket to the leg section of the cover.
Please click HERE-> for further information and a measurements form.
Why not attach the leg section to a Splash® cover?
We are often asked why we don’t simply attach a leg section to our Splash® covers?
The answer is quite simple, if we added a zip or Velcro to a leg section so it attached to the Splash® cover, that has vented holes in it so the motor can operate, or pull start holes or if you have a smaller motor it has a hole in the rear of the cover so you can lift the motor out of the water (no trim or tilt), you would not be getting the overall protection that is offered by the Full cover as vents and other holes would remain uncovered.
What is the warranty on OCA covers?
All OCA covers carry a 2 year limited warranty for domestic use and 1 year for commercial use.
For full details on all terms and conditions Click Here->
What if my cover is faulty or does not fit?
If there is a manufacturing or component fault you need to contact the Distributor or Dealer who sold it to you. They will approve a return (subject to the conditions set out in the supplied care instructions) and we will investigate the fault. If there has been a component failure we will rectify the fault.
What if it does not fit?
All our covers are custom made to a model specific patterns. Your cover is made based on the order submitted through the interactive order pages and the information you provided. We will investigate the causes of a non-fitting cover but if the fault is due to the wrong information being provided by the customer we will not be responsible for replacing it. Should the fault be ours we will rectify the problem.
For full details on our Terms & Conditions Click Here->
Splash Covers in use
How to fit a full cover
Iron on HP lettering tutorial